Carbon-bridged MoS(2) heterostructure enables fast kinetics and reduced electrochemical polarization for Na(3)V(2)(PO(4))(2)F(2)O cathode materials
Authors: Zhang, Jinbao; Sun, Xiaofei; Yu, Dan; Wang, Zikang; Lin, Ziqi; Wang, Haitao; Mei, Xuesong
Source journal: Journal of colloid and interface science (2026-11-15)
DOI: 10.1016/j.jcis.2026.142002
Abstract
Improving the rate capability and structural durability of sodium vanadium oxyfluorophosphate (Na(3)V(2)(PO(4))(2)F(2)O, NVPFO) requires more than enhancing electronic conductivity alone, because sluggish Na(+) transport, interfacial polarization, and lattice evolution are closely coupled during electrochemical cycling. Herein, we develop a carbon-bridged NVPFO/molybdenum disulfide (MoS(2)) heterostructure to explore how interfacial architecture can jointly regulate reaction kinetics and structural reversibility. The central design concept is to use carbon as an interfacial bridge between NVPFO and MoS(2), integrating conductive pathways with heterointerface regulation rather than relying on a conventional conductive coating alone. Electrochemical kinetics, state-resolved impedance, and in situ structural analyses collectively reveal a more favorable reaction process in the optimized heterostructure, characterized by enhanced apparent Na(+) transport, reduced polarization, and limited lattice variation. The unit-cell volume changes by less than 3% during cycling, while the apparent Na(+) chemical diffusion coefficients reach (2.1 +/- 1.1) x 10(-10) cm(2) s(-1) during charge and (2.1 +/- 1.4) x 10(-10) cm(2) s(-1) during discharge. These coupled kinetic and structural characteristics enable a discharge capacity of 77 mAh g(-1) at 20C and approximately 60% capacity retention after 1000 cycles at 1C. A hard‑carbon pouch-type full cell further retains 81.9% of its initial capacity after 300 cycles at 1C. Beyond demonstrating improved electrochemical performance, this study provides a heterointerface-engineering strategy for investigating and coordinating interfacial kinetics, Na(+) transport, and structural reversibility in polyanionic sodium-ion battery cathodes.
Related topics
Related open access articles
- Effect of pyrolysis temperature on ochratoxin A adsorption mechanisms and kinetics by cashew nut shell biochars
- Drying characteristics and solar convective drying kinetics of China Hami melon slice
- Kinetic study of photocatalytic degradation of Ifos famide in a microchannel and simulation
- Photocatalytic degradation of microcystin-LR by modified high-energy {001} titanium dioxide: Kinetics and mechanism study of HF8
- Yoghurt powder production using microwave–vacuum drier: drying kinetics, mathematical modeling, and characteristics
- Adsorptive and kinetic characterization of aqueous zinc removal by biochars
Abstract and bibliographic data from PubMed (U.S. National Library of Medicine). Copyright of the abstract belongs to the original publisher or authors.