Synergistic NiMn(2)O(4)@Biochar@CuBTC-MOF electrode for sensitive metformin detection: Insights from electrochemical and DFT analysis
Authors: Kim, Eun-Bi; Pham, Bach Tuyet Anh; Jason, Ian; Panigrahi, Puspamitra; Kong, Ing; Ameen, Sadia
Source journal: Colloids and surfaces. B, Biointerfaces (2026-11-12)
DOI: 10.1016/j.colsurfb.2026.116313
Abstract
Metformin (MET) is a primary therapeutic for Type 2 Diabetes Mellitus; its environmental persistence and resistance to breakdown have raised concerns regarding long-term water contamination. Current studies demonstrate that the nanomaterial-based advanced functionalized sensors offer rapid, selective, and highly sensitive analytical solutions for environmental monitoring, food safety, and clinical diagnostics. This work aims to develop an effective electrochemical sensor for detecting MET using a nanocomposite material prepared by combining nickel manganite (NiMn(2)O(4)) with biochar (BC) and Metal-Organic Framework (MOF), i.e., copper ions (Cu(2)(+)) and 1,3,5-benzenetricarboxylic acid (BTC), CuBTC-MOF. In the prepared NiMn(2)O(4)@BC@CuBTC-MOF nanocomposite, NiMn(2)O(4) provides enhanced electrical conductivity, BC offers structural stability, while CuBTC-MOF contributes high porosity. The resulting nanocomposite exhibited a BET surface area of approximately 236.58 m(2) g(-1), a pore volume of approximately 0.1752 cm(3) g(-1), and an average pore size of approximately 2.96 nm, indicating a mesoporous structure favorable for electrochemical sensing. NiMn(2)O(4)@BC@CuBTC-MOF nanocomposite-modified sensing electrode showed a clear redox response, with a high oxidation current observed upon exposure to MET in an electrolyte. The experimental results demonstrated a reproducible sensitivity of approximately 32.8462 muA/muM.cm(2) and an LOD of approximately 10.8024 muM, with a good linear correlation (R(2) = approximately 0.97838). Furthermore, DFT calculations revealed favorable MET adsorption on the NiMn(2)O(4)/BC surface with an adsorption energy of -2.08 eV, accompanied by significant charge redistribution and enhanced electronic states near the Fermi level, confirming improved charge-transfer characteristics and supporting the experimentally observed sensing performance. Combining these materials into a nanocomposite enhances the sensor's sensitivity, electron-transfer kinetics, and long-term stability. Thus, the NiMn(2)O(4)@BC@CuBTC-MOF-based sensor demonstrates promising stability and reproducibility, confirming its potential as a sensor device for environmental remediation.
Related topics
Related open access articles
- Effect of pyrolysis temperature on ochratoxin A adsorption mechanisms and kinetics by cashew nut shell biochars
- Drying characteristics and solar convective drying kinetics of China Hami melon slice
- Kinetic study of photocatalytic degradation of Ifos famide in a microchannel and simulation
- Photocatalytic degradation of microcystin-LR by modified high-energy {001} titanium dioxide: Kinetics and mechanism study of HF8
- Yoghurt powder production using microwave–vacuum drier: drying kinetics, mathematical modeling, and characteristics
- Adsorptive and kinetic characterization of aqueous zinc removal by biochars
Abstract and bibliographic data from PubMed (U.S. National Library of Medicine). Copyright of the abstract belongs to the original publisher or authors.