Triclosan Surface Coating Inhibits Bacterial Attachment: In Vitro Assessment for Prosthetic Joint Infection Prevention
Authors: van Agtmaal, Julia L; Peeters, Laura C W; Armbruster, David; Geurts, Jan; Kasinath, Rajendra; Arts, Jacobus J C
Source journal: BioMed research international (2026-01-01)
DOI: 10.1155/bmri/6576293
Abstract
Approximately 2% of primary and 30%-40% of revision arthroplasties lead to prosthetic joint infection (PJI). Biofilm formation and antimicrobial resistance decrease bacterial susceptibility to antibiotics. This study examined the use of the synthetic broad-spectrum antimicrobial agent triclosan (2, 2, 4 (')-trichloro-2 (')-hydroxyphenyl ether) to prevent bacterial attachment on titanium (Ti) and ultrahigh-molecular-weight polyethylene (UHMWPE) substrates without a carrier by vaporizing it in a reservoir. Triclosan loading on Ti and UHMWPE and release from Ti samples was assessed over 21 days. In vitro antimicrobial activity against S. aureus and E. coli was tested according to standards ISO 22196, ASTM E 2180-18, and JIS Z 2801 for regulatory compliance, followed by bacterial adhesion tests in suspension. Cell viability was assessed following ISO 10993-5 standards using WST-1 and LDH assays with L929 cells (ATCC cell line CCL 1, NCTC clone 929) in a static test on extract. The target loading of 0.15 mg/cm(2) was achieved on Ti (0.15 mg/cm(2)), whereas UHMWPE reached 0.03 mg/cm(2). The 21-day release test on Ti samples showed an initial burst of 0.05 mg/cm(2) on Day 1. The cumulative release was 0.126 mg/cm(2) (84% of the total dose), indicating continuous triclosan release and availability. Both antimicrobial tests and bacterial strains showed a reduction of 3.70-6.18 logs in bacterial count for the triclosan-coated samples compared with uncoated ones. Triclosan was more effective against S. aureus than E. coli. The Ti samples showed slightly higher reductions than UHMWPE. Triclosan exhibited low cell viability (4.1%-41.2%) and high cytotoxicity (up to 97.8%) across all tested extract concentrations. Although the triclosan coating demonstrated a significant bacteriostatic and bactericidal effect, results from static 2D cell viability assays raise concerns at this dose level. Further research using dynamic in vitro or in vivo systems is necessary to investigate the balance between the antibacterial efficacy and the toxic effects of triclosan.
Related topics
Related open access articles
- Emerging mycotoxins in botanicals: benefit and risk
- A Brief Review on Core/shell Quantum Dots
- In vitro cytotoxicity studies on galactosylated chitosan nanoparticles for the delivery of oridonin to liver
- Separation of Six Lupane-Type Triterpenoid Saponins from Leaves of Acanthopanax gracilistylus by HSCCC with Preparative-HPLC
- Chemical characterization of polyphenol extracts from Andean and industrial Solanum tuberosum tubers and their cytotoxic activity on human hepatocarcinoma cells
- Effects of Stresses on the Growth and Cytotoxicity of Shiga-Toxin Producing Escherichia coli in Ground Beef and Spinach
Abstract and bibliographic data from PubMed (U.S. National Library of Medicine). Copyright of the abstract belongs to the original publisher or authors.